Skip to main content

300BLK Decepticon

After a bit of a break from building stuff, I finally got around to finishing my 300BLK pistol using my Decepticon 80% lower.

A breakdown of everything:
- QD Ambi 80% billet lower
- Aero Precision upper no forward assist
- Centurion C4 Rail
- Lantec Dragon 7.62 muzzle brake
- Troy FDE BUS
- Standard US Mil trigger group
- Seekins Ambi Safety
- SPIKES H2 buffer - Standard Carbine
- KNS SPIKES Anti Rotation Pins
- KAK Shockwave




Inspired by this picture.


Comments

Post a Comment

Popular posts from this blog

Overview and Review of the HK416D 22LR

Click on image for a larger view. Hi,  this is an overview of the HK416D145RS or the 22LR replica of the HK416 rifle. This rifle is made by Walther and imported into the US via UMAREX USA.  The rifle will be stamped with the HK trademarks but on the right side of the receiver will be the Walther/UMAREX marks. Specifications: Caliber .22 L.R. Capacity 10 or 20 rds Mode of Fire Semi-Auto Barrel Length 16.1 in (410 mm) Barrel Twist 1 in 13-3/4 in Rifling Grooves 6 Rifling Length 13.78 in (350 mm) Front Sight Fixed - Removeable Post Rear Sight Adjustable - Windage & Elevation Overall Length 32.75-35.25 in (830-895 mm) Overall Height w/Mag 11.4 in (290 mm) Overall Width 3 in (75 mm) Stock Style Adj. Telestock Trigger Type Single-stage Trigger Pull 6.6-9.9 lbs Safety Type Manual Principal of Operation Blowback Muzzle Thread M8x.75 Length of Pull 11.5-14.625 in (290-370 mm) Sight Radius 13.5...
11 comments
Read more

Rattle Can - HK 416

Rainy Saturday so I decided to paint my HK416 using Krylon Ultra Flat Camo paints.  I used to Duracoat and Cerakote everything the color I wanted but I decided that that was overkill.  All you really need is just a rattle can.  The Duracoat/Cerakote finish is durable but what I don't like is the process where some of the "painters" for Cerakote remove your anodizing so it "sticks" better.  The anodizing is for hardness and protection. Cerakote doesn't have the same hardness - SO STOP CERAKOTING everything and allowing these guys to strip off your protective finish.  Simply spray over it if anything - that what I do when I apply it at home. What else are you supposed to do on a rainy day weekend?
2 comments
Read more
Patches created to help the Cal Guns Foundation.  Paypal to:  freebug2day@yahoo.com with $8.00 as friends and family.  Includes standard USPS shipping (2 stamp).  All proceeds go to Cal Guns Foundation.  The Calguns patch generated a donation of $300 to help fight for 2A rights in CA. Lots of others have been asking for a new version of the old patch in FDE/Sub-dued. HK Buffer Spring compared to AR Carbine Spring Other stuff for sale.
4 comments
Read more